Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Alameda, CA
Garage door work on Alameda Island rarely looks like it does anywhere else in the Bay Area. We regularly replace and install doors cut to fit carriage-house openings built for 1920s wood panels, not modern steel sections. Whether it’s a full Garage Door Installation, a spring that gave out on Gold Coast morning, or an opener that quit in a Harbor Bay condo garage, the job starts with the building, the alley, and the salt air. Compass Garage Door Repair has served Alameda since 2018. Call (855) 356-4948 when you need a specialist who knows the difference.
Why Alameda Homes Are Different
Alameda is an island of pre-war housing reached only by bridges and tunnels. Most garages here are detached, alley-facing structures behind 1900s to 1930s Victorians and Craftsmans. Many of those original single-bay openings are undersized for today’s stock doors, and after a century of settling on bay-fill soil, plenty are out of square by an inch or more. A standard 16-foot door does not simply drop in. It needs custom framing, track shimming, and sometimes a narrower panel configuration to clear the old jambs.
The East End, Gold Coast, and West End each have their own alley networks. Some garages have no driveway access at all: the building opens only to a narrow rear lane, so trucks, springs, tracks, and openers get walked in through a side yard. On the 94502 Harbor Bay side, newer condos often stack garages or share walls, which changes opener mounting and spring clearance. Then there’s the weather. Marine layer dampness and salt air off San Francisco Bay corrode steel hardware faster than inland, and winter rain driven sideways off the bay gets past worn alley-facing seals. Wood doors in the fog belt swell and bind in their tracks. All of this shapes how we spec parts and frame every job.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Main Alameda Services
Most calls we take in Alameda fall into two buckets: the door itself has failed, or the opener has. Here is what each involves on the island.
Garage Door Repair in Alameda
When a door is stuck halfway, grinding along a rail, or leaning in the opening, the problem is usually mechanical: a broken spring, a snapped cable, a bent track, or rollers that have seized. In Alameda, we also see a lot of corrosion-related failures that inland homes never experience. Salt air works on springs and fasteners year-round, and a door that hasn’t been serviced in a decade is often running on rust. We carry parts for Clopay, Amarr, Wayne Dalton, and Craftsman doors, which covers most of what’s hung in Alameda garages. For the full scope of this service, see Garage Door Repair in Alameda.
Garage Door Opener Repair in Alameda
If the door moves fine by hand but won’t respond to the wall button or remote, the opener is the culprit. We work on LiftMaster, Chamberlain, Genie, and Craftsman units, which account for the large majority of openers installed across Alameda. Common failures here include logic boards that have taken moisture from the marine layer, stripped drive gears, and sensors knocked out of alignment on shared condo garage walls. We diagnose before we quote, so you know whether the fix is a $120 sensor pair or a full opener replacement. Details are on our Garage Door Opener Repair in Alameda page.
Garage Door Installation in Alameda
Garage Door Installation in Alameda typically costs $700 – $2,200 for a complete new door, and most of the project’s complexity here comes from the opening, not the door. On the Gold Coast and in the East End, we’re often fitting a modern steel or composite door into a 1920s carriage-house frame that’s out of square, too narrow for stock sizes, and backed by a historical facade we won’t touch. On the 94502 side, condo garages bring their own constraints: shared walls, fire-rated assemblies, and opener placement. A new door also includes a full Garage Door Installation spec: panels, track, springs, cables, rollers, and weather seal, all matched to the opening and the climate.
Garage Door Replacement
Signs you need it
The door sags when open, panels are dented or split, it binds every winter, or the bottom section is rusted through from years of bay-driven rain.
What it costs in Alameda
A full garage door replacement in Alameda runs $700 – $2,200 depending on size, material, insulation, and how much framing the existing opening needs.
How we do it
We measure the opening for square, order a door cut to those dimensions where stock won’t fit, remove the old panels and hardware, then install the new door with new track, springs, and seals in one visit.
Garage Door Installation Service
Signs you need it
You’ve got a new garage addition, a converted carriage house with no door at all, or a rough opening that was never finished.
What it costs in Alameda
Installation of a new door into a bare or newly framed opening typically falls in the $700 – $2,200 range in Alameda, with custom framing adding to the upper end.
How we do it
We verify the opening dimensions and framing, install mounting brackets and track, hang the sections, tension the springs, and calibrate the door’s travel and balance.
Garage Door Seal Installation
Signs you need it
You see daylight under the door, leaves and harbor fog blow underneath, or water pools inside after a winter storm.
What it costs in Alameda
Weather seal replacement is part of most door installs and is priced within the $700 – $2,200 full-installation range when bundled; a standalone seal job is quoted from the same hourly markup we use on repairs.
How we do it
We pull the old bottom seal, clean the channel, cut a new bulb seal to width, and set it so it compresses evenly across an often-uneven Alameda slab.
What Garage Door Installation Costs in Alameda
| Item | Typical range in Alameda |
|---|---|
| New door installation | $700 – $2,200 |
| Panel replacement | $250 – $500 |
| Opener installation | $250 – $550 |
How long does a garage door installation take in Alameda?
Most single-door residential installations take one day on site. If the opening needs custom framing because it’s a 1920s carriage house, we may schedule a separate framing visit first.
Do I need a permit to replace a garage door in Alameda?
In most Alameda cases, replacing a door in the same opening using the existing framing does not trigger a permit, but properties in historic districts or with street-facing facade changes may. We’ll flag that before any work starts.
Brands We Service in Alameda
We’re certified to work on eight major residential brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That matters because a Clopay door and an Amarr door fail differently, and we carry compatible parts for both instead of forcing generic hardware. For full details on our brand coverage, see our brands. Most common parts are on the truck in Alameda the same day.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Alameda, CA
| Service | Typical range in Alameda |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| Garage door repair | $150 – $600 |
Salt air and out-of-square openings are the two biggest cost drivers in Alameda: corroded hardware often means replacing more than the failed part, and custom shimming on old frames adds labor. Regardless, the price is quoted and agreed before any work begins, so the number you approve is the number you pay.
Neighborhoods We Serve in Alameda
We cover all of Alameda, including 94501 and 94502. Every peninsula neighborhood has its own alley geometry and parking constraints, but our trucks are set up to work from narrow rear lanes and side yards.
- East End
- Gold Coast
- West End
- Bay Farm Island
- Harbor Bay
We can typically schedule non-emergency work across Alameda inside the same week, and emergency spring or cable failures on the island are addressed as the schedule allows throughout the day.
Service Area – Cities Near Alameda
Alameda is the center of our service map, but we also cross the bridges and tunnels for work in Oakland, CA, Piedmont, CA, San Lorenzo, CA, and Castro Valley, CA. The same brand-fluent crews that work Alameda’s alley garages cover those cities too.
Serving Alameda, CA – Our Local Coverage Area
We’re based in the Alameda area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Alameda
We prioritize emergency spring and cable failures on the island as the day’s schedule allows, with most Alameda addresses reached the same day. Non-emergency installs and replacements are scheduled for the same week. Call (855) 356-4948 and we’ll give you a real window.
We’ve worked enough Gold Coast and East End carriage houses to know when an opening needs custom framing rather than demolition. If a property sits in a historic overlay, we keep changes behind the facade and tell you before anything is ordered.
Yes. Shared-wall and stacked garage configurations in 94502 come with mounting and clearance constraints that our techs are familiar with, and we carry opener and track hardware suited to tighter spaces.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Alameda Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Carmen Salazar"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Gilbert Reyes"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Rosa Mendoza